How to fit your new HD Car Cover


Before you begin
 Ensure your vehicle is clean and dry to ensure dust / dirt particles do not scratch your vehicle. Fold in, foldable side mirrors / remove any roof aerials.


1. Place your HD Car cover onto the roof of the vehicle. (If your vehicle is quite high you can start at the front or the rear of the vehicle).
2. Locate the tag on the cover which indicates FRONT
3. Roll out the cover onto the vehicle, ensuring the cover does not touch the ground. .
4. Unfold the cover so it drops down the side of the vehicle, repeat this step on the opposite side.
5. Attach the elasticised front of the cover to the front bumper of your vehicle.
6. Continue to roll out and pull the cover over the vehicle's top all the way to the back and attach the elasticised hem to the rear bumper.
7. Adjust where needed to ensure correct fitting.
8. Throw one side of the central buckle strap under the vehicle and secure buckle
9. The cover also has 4 additional straps which can be used by tying them to the wheels of the vehicle in windy weather. (not Gail force winds)

The remove the cover, reverse the instructions.